Setting Access Point

Now here I will share knowledge about how to set access point, prior to his ways there are some tools that you need, namely:
1. Router Access Point
2. leptop or PC of course.
Okay, let's get started ...
1. Incidentally, I use the access point from BLUE-LINK, before the first reset is used do not forget.

2. Then, connect to your access point. (no need to use data)

     If you are connected to the access point, go to the browser and type the IP address listed in the tool tersebut.For example: (192.168.2.254)

3. If you have entered, it will appear as below. Fill in the username: admin and password: admin, and then OK.

4. If so, will appear as below. Select Wireless, then select Basic Settings.

just focus on the SSID, the content according to your wishes. and if you want the password please just on security changed into a WPA-PSK, and fill in the password you want. if it is click Apply Changes

5. If the settings are finished, please check on the wireless network conection. If an access point name that you created, you are Managed and pass follow my tutorial.

ThankYou...